Sup Pump Manual with Double Action

The practical HUIIKE Double-Action Hand Pump makes inflating your inflatable paddle boards easier and more comfortable. Its design adapts to any situation and features a non-slip ergonomic handle, allowing you to inflate your board in just a few minutes to the recommended pressure of 12–15 PSI. You can monitor the pressure at all times thanks to the built-in gauge, while the flexible hose makes inflation easy, even on sandy beaches. The pump also has a sturdy base for stability and offers a dual function, allowing you to both inflate and deflate your paddle board quickly and easily.

What parts does the paddle board pump have?

• Double-action pump: It helps you both inflate and deflate. This dual function is ideal for making inflation easier. It features a stable, sturdy base and an ergonomic handle that fits comfortably in your hand. Dimensions: 63 cm high, 25 cm wide (at the handle), and 23 cm wide (at the base).

• Hose: The flexible hose is 126.5 cm long, making it more convenient to inflate your board.

• Pressure gauge: The pump includes a built-in pressure indicator at the center, so you can check the board’s pressure. Note: The gauge needle will start moving once you reach 7 PSI. The maximum recommended pressure is 15 PSI.

How to use the HUIIKE pump to inflate

Follow these simple steps to inflate your paddle board:

1. Press the valve button to ensure it’s in the highest position.

2. Connect the hose to the ‘INFLATE’ port on the pump. Attach the hose to the board valve and twist clockwise to lock it in place.

3. Screw in the white cap on the pump by turning it clockwise to start inflating.

4. The needle will move once you reach 7 PSI. At this point, remove the white cap.

5. Continue inflating until the needle points between 12 and 15 PSI. Do not inflate beyond 15 PSI to maintain ideal board stability.

6. Remove the hose from the board by twisting it counterclockwise, and securely close the valve cap by turning it clockwise.

How to use the pump to deflate

1. Clean the valve area with fresh water to remove sand and salt, then dry it with a cloth.

2. Unscrew the valve cap and gently press the button to release the air.

3. Roll the board starting from the opposite end to force the air out.

4. You can speed up deflation by using the pump on the ‘DEFLATE’ side.