Enjoyer Double Acting Manual Paddle Surf Inflator

HUIIKE's handy double action manual inflator will make inflating inflatable paddle surfboards easier and more comfortable. Its design adapts to any situation and has an ergonomic non-slip handle with which you can inflate your board in a matter of minutes to the recommended pressure between 12 and 15 PSI. You can check the pressure at all times thanks to its built-in pressure gauge, while the flexible hose makes it easy to work even on sandy beaches. The inflator also has a solid base for stability and offers a dual function whereby you can inflate and deflate your paddle surfboard quickly and easily.

What are the parts of the paddle surf board inflator?

• Double action inflatorThe inflator will help you to inflate and deflate. This dual function is ideal for easy inflation. It has a solid and stable support and an ergonomic handle that fits your hand. It measures 63 cm high, 25 cm wide at the handle and 23 cm wide at the base.
• HoseThe inflator hose is very flexible and measures 126.5 cm long, useful for inflating the board more comfortably.
• Pressure gauge: The inflator includes a pressure gauge in the center portion so you can check the pressure of the board. Remember: the inflator needle will start to move at 7 PSI and the maximum board pressure is 15 PSI.

How to use the HUIIKE inflator?

To inflate your board, just follow these simple steps:

1. Press the valve button so that it is as high as possible.
2. Connect the hose to the 'INFLATE' inflator port. Put the hose on the valve of the table and turn clockwise to lock it.
3. Place the white cap on the inflator by turning it clockwise to start inflating.
4. The needle will move when you reach 7 PSI on the pressure gauge. When this pressure is reached, remove the white plug from the inflator.
5. Continue to inflate the board until the needle reads between 12 and 15 PSI. Do not inflate more than 15 PSI, the ideal stability for the board.
6. Remove the hose from the table by turning it to the left side and place the valve cap by turning it to the right.

How to use the inflator to deflate?

1. Clean the surface of the valve from sand and salt water with fresh water and wipe dry with a cloth.
2. Unscrew the valve cap and press the button carefully to release the air.
3. Fold the board from the opposite side to remove the air. Help yourself to deflate it with the inflator on the 'DEFLATE' side to save time.