Double Action Manual Paddle Surf Inflator

What parts does the inflator have of paddle surf boards?

 -        Double Action InflatorThe inflator will help you to inflate and deflateThis dual function is ideal for facilitating inflation. It has a solid and stable support and an ergonomic handle that fits your hand. It measures 63 cm in height, 25 cm in width at the handle, and 23 cm in width at the base.

 -        HoseThe inflator hose is very flexible and measures 126.5 cm in length, useful for inflating the board more comfortably.

 -        Manometer: The inflator includes a pressure gauge in the central part so you can check the pressure of the board. Remember: the needle of the inflator it will start to move at 7 PSI and the the maximum pressure of the table is 15 PSI.

How to use the HUIIKE inflator?

 To inflate your board, you just need to follow these simple steps:

 1.      Press the valve button to be as high as possible.

2.      Connect the hose to the 'INFLATE' hole of the inflator. Place the hose in the valve of the board and turn it clockwise to lock it.

3.      Place the white inflator cap turning clockwise to start inflating.

4.      The needle it will move when you reach 7 PSI in the manometer. Upon reaching this pressure, remove the white cap from the inflator.

5.      Continue inflating the table until the needle indicates between 12 and 15 PSI. Do not inflate more than 15 PSI, the ideal stability for the board.

6.      Remove the hose from the table by turning it to the left and place the valve cap by turning it to the right.

How to use the pump to deflate?

 1.      Clean the surface of the valve of sand and salt water with fresh water and dry it with a cloth.

2.      Unscrew the valve cap and press the button carefully to release the air. 

3. Fold the table from the opposite side to remove the air. Help yourself to deflate it with the inflator on the 'DEFLATE' side to save time.